|
It's the easiest way to send DMX512 signal from your lighting console to a computer with ArKaos VJ DMX through a simple USB connection.
Based on the FTDI 232BM chip, it benefits from a hardware buffer to guarantee the stability of the DMX signal received, it also provides a convenient DMX THRU connection to easily include ArKaos on your DMX line.
Features:
- Micro processor enabled
- 1500 V full isolation (data & power lines to protect your computer from surges)
- 1 Input & 1 Output connector (there is only one DMX port though)
- RDM (talkback) compatible
- Internal frame buffering (will work on any PC)
- Will talk at any comm's speed, compatible with any system for which the FTDI chip has drivers (Windows, Mac OS X, Linux..)
- Universe & user config EEPROM
- Refresh Rate configurable from 1 to 40Hz
- Break configurable from 96uS to 1.3mS
- MaB configurable from 10.6uS to 1.3mS
- No Receive framing problems (compared to Open DMX USB)
- Upgradeable firmware
|
